Buffer tank 60L Duplex Steel 2205 G3/4"F (1″ Adapter)

PWT-60L

Buffer tank for Heatpump system  60L  Duplex Steel 2205

PFA-001: 3/4"  to 1" adapter

This is an electric water tank used to obtain and store hot water, and can also be used for solar energy, heat pumps, boilers, etc.
The buffer water tank is an insulated pressure tank with a pressure of 0.76MPa.
Make sure there is plenty of hot water available.
The product is suitable for indoor and outdoor installation, and can be placed in an appropriate position according to the size of the space position.

Product performance:
* High efficiency -- the use of EU standard polyurethane foam, uniform foaming without bubbles, 24 hours only drop 6 degrees Celsius.
* Environmental protection -- the water tank absorbs heat through the coil to heat the hot water in the water tank, in line with environmental standards.
* Durability -- beautiful appearance, long service life (10 years), suitable for a wide range of areas.

* Duplex combine the advantage of austenitic and ferritic steel.
* The pitting corrosion resistance of Duplex 2205 is higher than SUS304 or SUS316L.
* Duplex material water tank have a longer lifetime.

SST MODEL		PWT-60L(buffer tank)	PWT-100L(buffer tank)
NOMINAL CAPACITY	L	60	100
OUTER TANK DIAMETER	mm	Φ470	Φ470
INNER TANK DIAMETER	mm	Φ370	Φ370
HEIGHT	mm	672	1035
INNER TANK MATERIAL		Duplex Steel 2205
INNER TANK THICKNESS	mm	1	1
OUTER CASE MATERIAL		Galvanized Sheet with Painting
ELECTRICAL HEATER TYPE		No
CONNECTIONS	Temp.sensor hole	G1/2"	G1/2"
	Hotwater outlet	G3/4''	G3/4''
	Heat Exchanger coil	/	/
	inlet/outlet
	Cold water inlet	G3/4''	G3/4''
	Circulation	G3/4''	G3/4''
	T/P connection	G1/2"	G1/2"
Mg.anode		No
WORKING PRESSURE	Bar	6	6
MAX.TESTING PRESSURE	Bar	10	10
INSULATION		Polyurethane Foaming
INSULATION THICKNESS	mm	50	50
PACKING SIZE	mm	540*540*790	540*540*1170

Manufacturer Details
Condition	New product
SKU	PWT-60L
Warranty (carry-in)	1 year